Buildon Vermiculite Plaster a gypsum hemihydrates plaster with special additives and light weight aggregates.
Approved by
Application of Gypsum
Surface must be clean, dry, firm & free of dust.
Important properties like soluble salt content, thermal characteristics, shrinkage, strength, suction bonding properties etc of the background to be plastered, should be evaluated before application.
Buildon perlite plaster can be applied directly on most of the surfaces like Brick walls/Fly ash brick/Siporex blocks/Concrete surfaces/Sand cement plaster walls etc.
Suitable fixture can be fixed after the plaster reaches it’s initial setting time. once the plasters has the set, you can put fixtures of varying weights. Smaller one can be supported by using steel hooks and pins, while heavies frames and objects can be accommodated with plugs and screws, or suitable fixture, adequately penetrated into the background to ensure a film hold.
Direction For Use
The right way to mix is to add the powder to water, not water to the powder.
Avoid mixing more powder that can be used within 15 minutes.
Do not temper or mix fresh material
once a mix has started to set.
After taking the required amount of plaster, always fold the open end,
to protect the plaster from moisture.
Setting time cannot be altered by diluting the mixture with water.
Technical Specifications
Purity Whiteness
Off white , 78.84 purity
Fineness
Mesh 200, Residue 4%
Setting Time
Intial 20 - 25 min.
Final 25 - 30 min.
Compressive Strength (Dry)
14 N/mm2
Coverage at 12mm
thickness (25 Kgs bag)
23-24 Sq. ft.
More Products
Explore products that will meet your needs,
Buildon perlite plaster a gypsum plaster with special additives and light weight aggregates. The aggregates contein …
The distinguished advantage of the Buildon Gypsum Plaster-one coat is that it is made out of the highest grade of……